Idiomas disponibles
Idiomas disponibles
CLEANING AND CARE
CAUTION: Before cleaning the unit, turn power
CLEANING THE TRANSDUCER/ULTRASONIC MEMBRANE
The transducer/ultrasonic membrane must be cleaned to remove water mineral deposits when "CLEAN" is
illuminated on the display. Failure to do so may cause reduced or no mist output.
1. Remove both water tanks
from the humidifier
base and pour out any
remaining water from
the water reservoir in the
direction as shown inside
the humidifier.
off and unplug unit from the outlet.
Transducer cover
2. Remove the transducer cover. Clean the transducer/
ultrasonic membrane with a 50/50 mix of white vinegar and
water on a cotton swab. Wipe off with a damp cotton swab.
Replace the transducer cover. Press and hold the clean
button for 3 seconds until the "CLEAN" light turns off.
NEVER touch the transducer/ultrasonic membrane with your
fingers; the natural oils in the skin can damage the surface.
NEVER submerge the base in water or any other liquid.
TO CLEAN THE FLOATS
Clean the float hinges with a 50/50 mix of white
vinegar and water to remove any calcified water
minerals as necessary.
TO CLEAN THE TANKS
Remove the water tanks from the humidifier base
and pour out any remaining water. Rinse inside the
tanks with clean water.
Every day: Empty and rinse each tank and tank
cover before refilling.
Every week: To remove any scale or buildup, use a
50/50 mixture of white vinegar and lukewarm water
to clean the inside of the tanks.
11
Transducer/ultrasonic membrane
