Idiomas disponibles
Idiomas disponibles
17024828_0706 SR 20_23 ff NAFTA.book Seite 8 Donnerstag, 6. Juli 2006 3:55 15
ENG
ENGLISH
9 Tips and Tricks
Do not press the device too firmly against the
surface being sanded. This does not improve, but
rather impairs, the sanding performance.
For optimum extraction performance (SR 10-23
Intec):
Empty the dust collection box and clean the dust
filter in good time.
Use a suitable sanding disc to achieve the best
possible work results:
Removal of old paint coats = P40
Pre-sanding of wood = P 60, P 80
Finishing of wood = P 100, P 120
Sanding of veneers, sealing primer, filler, paint = P
180, P 240
10 Accessories
Use only genuine Metabo accessories.
If you need accessories, check with your dealer.
For dealers to select the correct accessory, they
need to know the exact model designation of your
power tool.
See page 4.
A Sanding discs, perforated, quality finishing for
wood
B Sanding discs, perforated, extra quality for
wood/metal
C Sanding discs, non-perforated, quality
finishing for wood
D Sanding discs, non-perforated, extra quality
for wood/metal
E Hole punch
F Dust collection box
G Sanding dust filter
H Metabo universal vacuum cleaner
I Adapter
J Suction hose
11 Repairs
Repairs to electrical tools must be carried out by
qualified electricians ONLY!
Any Metabo power tool in need of repair can be
sent to one of the addresses listed in the spare
parts list.
Please enclose a description of the fault with the
power tool.
8
12 Environmental Protection
Metabo's packaging can be 100% recycled.
Worn out power tools and accessories contain
considerable amounts of valuable raw and plastic
materials, which can be recycled.
These instructions are printed on chlorine-free
bleached paper.
13 Technical Specifications
Explanatory notes on the information on page 2.
Changes due to technological progress reserved.
P
=
Rated power consumption
1
P
=
Power output
2
n
=
Oscillating frequency at idle speed
0
n
=
Oscillating frequency at rated load
1
C
=
Dust collection box
A
=
Sanding plate
S
=
Oscillating circuit diameter
m
=
Weight
Wear hearing protection!
The stated technical specifications are subject to
tolerances (as specified in the respective current
standards).
