Steam Ironing - SOLAC CVG9507 Instrucciones De Uso

Centro de planchado compacto
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
Prepare the appliance according to the
function you wish to use:
FILLING WITH WATER:
It is essential to have filled the tank with wa-
ter to be able to work with steam.
Open the cover.
Fill the tank, taking care to observe the MAX
level (Fig.1).
Close water inlet lid.
Use of scented water automatically cancels
the warranty
CVG9507 USE:
Unroll the cable completely before plugging
it in.
Connect the appliance to the mains.
Once plugged in, the product will start to
heat up, during this heating period, do not
press the steam button, wait for the green
light to come on,
SMART:
The product adapts to all types of fabric:
- Temperature for synthetic fibres (Polyester,
Nylon...). Setting ●
- Temperature for silk, wool. Setting ●●
- Temperature for cotton. Y linen
Setting ●●● and Max
Wait until indicator (C) lights green, this
means that the appliance has reached tem-
perature, after its first warm-up.
During use of the appliance, indicator (C)
will come on and off automatically to indicate
when it is using power and heating.
DRY IRONING:
The appliance has a steam control trigger
(B) which, when set to off, allows dry ironing
(without steam) or with steam depending on
whether the trigger is pressed (Fig. 2).

STEAM IRONING:

It is possible to iron with steam whenever
the tank is filled with water and the correct
temperature is selected.
VERTICAL IRONING:
It is possible to iron hanging curtains, items
of clothing on their own hanger, etc. To do
so, follow these instructions:
Iron from top to bottom,.
Important: for cotton and linen, it is recom-
mended to put the base of the iron in con-
tact with the material. For other more deli-
cate fabrics, it is recommended to keep the
base of the iron a few centimetres away.
AUTO-OFF FUNCTION (STAND-BY):
CVG9507;
For the purpose of saving energy, the appli-
ance switches to auto-off mode (stand-by)
after 8 minutes in the upright position or 30
seconds if left flat, assuming the user has
not performed any action during this peri-
od. 3 beeps will sound and the indicator will
flash RED GREEN alternately
To resume ironing just touch the trigger or
move the iron.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
Unplug the appliance from the mains.
Drain the water out of the appliance.
Clean the appliance.
CLEANING
Disconnect the appliance from the mains
and allow it to cool before undertaking any
cleaning task.
Clean the equipment with a damp cloth with
a few drops of washing-up liquid and then
dry.
Do not use solvents, or products with an
acid or base pH such as bleach, or abrasive
products, for cleaning the appliance.
Never submerge the appliance in water or
any other liquid or place it under running
water.
HOW TO DEAL WITH LIME SCALE INCRUS-
TATIONS:
For the appliance to work correctly it should
be kept free of limescale or magnesium in-
crustations caused by the use of hard water.
To avoid this kind of problem it is advisable
to use distilled water.
To prevent this kind of problem, we recom-
mend the use of water with low lime or mag-
nesium mineralisation.
To do so, we recommend the use of the spe-
cific product for this kind of appliance, which
can be found in specialised shops and au-
thorised technical services.
A specific anti-lime scale product should be
used on this kind of product.
Home-made solutions, such as the use of
vinegar, are not recommended for descaling
this appliance.
EN
Tabla de contenido
loading

Tabla de contenido