Idiomas disponibles
Idiomas disponibles
3.
Assembly Instructions
NOTICE: This lawn mower is shipped without gas in
the engine.
If any parts are damaged or missing,
WARNING:
do not operate this product until the parts are replaced.
Use of this product with damaged or missing parts could
result in death or serious injury.
WARNING: Do not attempt to modify this product or
create accessories not recommended for use with this
product. Any such alteration or modification is misuse
and could result in a hazardous condition resulting in
death or serious injury.
WARNING: To prevent accidental starting that could
result in death or serious injury, always disconnect the
engine spark plug boot from the spark plug when
assembling parts.
WARNING: Never operate the mower without the
proper safety devices, guards, and chute in place and
working. Never operate the mower with damaged safety
devices. Operating the mower with missing or damaged
parts could result in death or serious injury.
Some parts of your new lawn mower have not been
completely installed for shipping purposes. To ensure safe
and proper operation, all parts and hardware must be
assembled as instructed below using appropriate tools to
ensure proper tightness.
10
SCarefully remove the product and any accessories from the
package. Make sure that all items listed in the Packing List
are included.
Inspect the product carefully to make sure no damage
occurred during shipping.
If any parts are damaged or missing, please call
855-693-2582 for assistance.
Packing list
Qty
Mower
1
Seat Assembly
1
Left Drive Control Lever
1
Right Drive Control Lever
1
Knob For Drive Control Lever
2
Battery Securing Rod
1
Oval head square neck bolt
2
(M8x70)
Hexagon flange bolt (M8x75)
2
Hex flange nut (M8)
2
Hitch plate
1
Operator's manual
1
Engine manual
1
12-13mm open-end wrench
2
Ignition key
2
CRUZ ZERO TURN MOWER
Assemble the Seat
1. Align the two threaded holes on the bottom of the seat
with the two eyelet slots on the seat pan. Slide the seat
downward to secure it.
2. Choose one of five holes on the seat pan and thread the
wing nuts into the holes (a). Secure with supplied wing
nuts (b). You can move the seat to your desired position
by selecting between the five different holes. (Fig.2A)
NOTE: Keep bolts and wing nuts loose until all bolts are
in your desired position. In addition, wing nuts(b) used
in second step are secured onto the bolts (a) of the seat
for shipment. Therefore you need screw the nuts
counterclockwise to get it loose before following
the second step.
3. Securely tighten all bolts and wing bolts.
4. Take hold of the seat switch wiring harness and pass it
underneath the battery securing rod. Connect the seat
switch wiring harness to the seat switch. (Fig.2B&Fig.2C)
NOTE: Mower will not operate without the seat switch
wiring harness connected.
WARNING: Be sure the seat is locked into place
before operating the mower. A seat that is not secure
can cause the operator to shift and lose control of the
mower, resulting in death or serious injury.
CRUZ ZERO TURN MOWER
1
2
3
a
b
Fig. 2A
Fig. 2B
11
