2.
Operator Safety
Save These Instructions
Save these instructions for future reference. This manual
contains safety information to make you aware of the
hazards and risks associated with the product and how to
avoid them. It also contains important instructions that must
be obeyed during the initial set-up, operation, and mainte-
nance of the product.
This product is designed and intended for cutting well
maintained grass and is not intended for other purposes.
It is important that you read and understand these instruc-
tions before you attempt to start or operate this equipment.
Make sure that you are fully familiar with the controls and
the correct use of the product.
Know how to stop the unit and disengage controls quickly.
4
Safety Alert Symbol and
Signal Words
The safety alert symbol
in this manual identifies safety
information about hazards that can result in personal injury.
The use of IMPORTANT, NOTE, and NOTICE in the text shows
clarifications, exceptions, or alternatives to the procedures.
A signal word (DANGER, WARNING, or CAUTION) is used
with the alert symbol to indicate the likelihood and the
potential severity of injury. In addition, a hazard symbol
may be used to represent the type of hazard.
DANGER: Indicates an immediately hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous
situation which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous
situation which, if not avoided, may result in minor or
moderate injury.
CRUZ ZERO TURN MOWER
Slope Identification Guide
Fig. 1
How to measure the slope of a lawn surface with a smart
phone or an angle finder tool:
CRUZ ZERO TURN MOWER
WARNING: Do not operate on slopes greater than
15 degrees.
1. Use a straight edge at least two (2) feet long (A, Fig. 1).
A 2x4 or a straight piece of metal works as well.
2. Angle finder tools:
Use your smart phone: Many smart phones (B, Fig. 1)
a.
have an in-clinometer (angle finder) located under the
compass application (app). Alternatively, you can search
your phone's app store for an in-clinometer app.
Use angle finder tools: Angle finder tools (C and D,
b.
Fig. 1) are available at local hardware stores or online
(also called in-clinometer, protractor, angle meter, or
angle gauge). Dial type (C) or digital type (D) work,
others may not. Read and obey the user instructions
supplied with the angle finder tool.
3. Put the two (2) feet long straight edge along the steepest
part of the lawn slope. Put the board up and down the
slope.
4. Lay the smart phone or angle finder tool on the straight
edge and read the angle in degrees. This is the slope of
your lawn.
5