Correct Handling Of Machine; Points In Operation And How To Stop - Makita EBH340U Manual De Instrucciones

CORRECT HANDLING OF MACHINE

Attachment of shoulder strap
– Adjust the strap length so that the cutter blade will be kept parallel with the
ground.
Detachment
– In case of emergency, remove the emergency detachment lever (1) by pulling
strongly with a finger. The machine sill detach from body.
Be extremely careful to maintain control of the machine at this time. Do not
allow the machine to be deflected toward you or anyone in the work vicinity.
WARNING: Failure to maintain complete control of the machine at all could
result in serious bodily injury or DEATH.

POINTS IN OPERATION AND HOW TO STOP

Observe the applicable accident prevention regulations!
STARTING
Move at least 3m away from the place of refuelling. Place the Petrol Brush Cutter on a clean piece of ground taking care that the cutting tool
does not come into contact with the ground or any other objects.
A:Cold start
1) Set this machine on a flat space.
For machine with U Handle
1) Set the I-O switch (1) to OPERATION.
2) Choke lever
Close the choke lever.
Choke opening:
– Full closing in cold or when the engine is cold.
– Full or half opening in restart just after stop of operation.
Hanger
Throttle lever
Low speed
High speed
15
(1)
I-O switch (1)
OPERATION
CLOSE