Idiomas disponibles
Idiomas disponibles
4 Press +, ¢, +, or > to move the cursor (>) to
the symbol showing the line you want to
adjust, and press (:).
CONVERGENCE
»+RED
+BLUE
MENU
e GUMRRUN
Exit
BW
+RED:
Red vertical and horizontal line (left/right/up/
down adjustment)
+BLUE : Blue vertical and horizontal line (left/right/up/
down adjustment)
5 Press ¢, ¢, #, or + to move the line until it
converges with the center green line, and
press
.
se GOQSRUN
Exit KM
To move
Press
Up
+
Down
+
Right
>
Left
+
6 Repeat steps 4 and 5 to adjust the other
lines until all three lines converge and are
seen as a white cross.
7. Press-MENU to return to the original screen.
Getting Started
20-EN
ETT
A Ed
aR
a
a
DN
a
eT
ES
Setting cable TV on or off
If you have connected the projection TV to a cable TV
system, set CABLE to ON (the factory setting). If not,
set CABLE to OFF.
You do not have to do this procedure if you perform
AUTO SET UP (page 17). Do this procedure only when
you want to set it manually.
1
Press MENU.
2 Press ¢ or # to select =, and press
:
3 Set CABLE to ON or OFF:
-(1) Press @ or ¥ to move the cursor (P) to CABLE,
and press ().
(2) Press # or # to select ON or OFF, and press
:
ao
4
00;
peed
POs:
BLOCK
RITE CHANNEL
BLE:
OFF
F,
CAI
AU.
Vv
{e]
G
BO
Li
INGUAGE
: ENGLISH
ONVERGENCE
Buo5
Exit fea
4 Press MENU to return to the original screen.
Note
¢ If CABLE appears in gray, the projection TV is set to a video
input and you cannot select CABLE. Press TV (black button) so
that a channel number appears.
