Parkside PWBS 180 B3 Traduccion Del Manual De Instrucciones Originale página 61

Fitting/changing accessory tools
(Fig. A)
WARNING!
► Press the spindle locking button
when the grinding spindle
Otherwise the appliance may be damaged.
NOTE
■ The carbide grinding head
removing formwork transitions on exposed
concrete, residual concrete on formwork
boards or adhesive residues on tiles.
■ Only use carbide sanding
heads
surface.
♦ Clean the sanding spindle
be mounted.
♦ Press the spindle locking button
and release the accessory tool.
♦ To fit the accessory tool, place the mounting
flange onto the sanding spindle
♦ Place the desired accessory tool onto the
sanding spindle
♦ Screw the clamping nut
the two-hole assembly spanner
NOTE
► Make sure that the collar of the clamping
nut is facing outwards.
PWBS 180 B3
only
is at a standstill.
is suitable for
with an even sanding
and all parts to
to clamp
.
.
and tighten it with
.
≤ 3,2 mm
Installing the dust extraction system
Dust from materials such as lead-based paints,
some types of wood, minerals and metal can be
harmful to health. Touching or inhaling the dusts
may cause allergic reactions and/or respiratory
illnesses of the user or people in the vicinity.
Certain dusts such as oak or beech dust are consid-
ered carcinogenic, especially in combination with
wood treatment additives (chromate, wood preserv-
atives). Materials containing asbestos may only be
worked on by specialists.
■ Always use dust extraction.
■ Operate the power tool either with the dust
bag or connect a dust and chip extraction
device.
■ Ensure that your workplace is adequately
ventilated.
■ We recommend you wear a respirator with
a class P2 filter.
■ Avoid kinking the suction hose
Observe the applicable regulations in your country
regarding the materials to be worked.
♦ Plug the inlet side of the suction hose
the extraction nozzle
♦ Proceed in the reverse order to dismantle the
suction hose
12
.
.
.
GB │ MT
onto
│
57 ■