Idiomas disponibles
Idiomas disponibles
PREPARATIONS FOR STARTING
5. Fill pump with water before use
As pump is self-priming type, fill water
fully from priming port into pump before
running.
Insufficient water can cause damage to
pump.
CAUTION
Running without filling water can dam-
age mechanical seal.
STARTING THE ENGINE AND PUMP
HOW TO USE
1. Ensure pump is fully filled up with wa-
ter.
2. Ensure strainer at the end of suction
hose is in water.
(If any mud or sand is at the bottom of
water, suspend hose avoiding the bot-
tom.)
3. Ensure no obstacle is at discharge
hose side.
Priming port
CAUTION
Beware of water hammering
Do not allow any vehicle to run over the
discharge hose.
Do not close the discharge valve abrupt-
ly because water-hammer may occur.
This may result in heavy damage to the
pump.
Collapse of
discharge hose
For engine manual and notes, please re-
fer Engine Operation Manual enclosed.
7
Do not close discharge
valve abruptly
