Idiomas disponibles
Idiomas disponibles
to move after the switch is turned off. A moment of
carelessness when using the hedge trimmer can re-
sult in serious injury.
b) Carry the hedge trimmer by the handle with the
blades stationary and take care not to operate the
switch. Carrying the hedge trimmer correctly reduces
the risk of accidental operation and injuries from the
blade.
c) Always put the cover over the blade when trans-
porting or storing the hedge trimmer. Handling the
hedge trimmer correctly reduces the risk of injury from
the blade.
d) Make sure all switches are off and the battery is
removed before removing trapped clippings or
servicing the product. Unexpected operation of the
hedge trimmer when removing trapped material can
cause serious injury.
e) Hold the hedge trimmer only by the insulated grip-
ping surfaces, as the cutting blade could hit hid-
den power lines or its own mains cable. Contact
between the blade and a live power line can also elec-
trify metal device parts and lead to an electric shock.
f) Keep any mains cables away from the cutting ar-
ea. Wires may be hidden in hedges and bushes and
could be accidentally cut by the blade.
g) Do not use the hedge trimmer in bad weather, es-
pecially if there is a risk of thunderstorms. This re-
duces the risk of being struck by lightning.
Additional safety instructions
• Always wear safety gloves, safety goggles, hearing
protection, sturdy shoes and long trousers when work-
ing with this product.
• The hedge trimmer is intended for work where the op-
erator stands on the ground and not on a ladder or
other unstable standing surface.
• Electrical hazard, remain at least 10 m from overhead
wires.
• Do not attempt to loosen a jammed/blocked cutter bar
until you have switched off the product and removed
the battery. There is a danger of injury!
• The blades must be checked regularly for wear and
have them resharpened. Blunt blades overload the
product. Any resulting damage is not covered by the
warranty.
• If you are interrupted while working with the product,
first finish the current operation and then switch off the
product.
• Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the pow-
er tool or these instructions to operate the power
tool. Power tools are dangerous in the hands of un-
trained users.
Residual risks
The product has been built according to state-of-the-
art and the recognised technical safety rules. Howev-
er, individual residual risks can arise during opera-
tion.
• Cutting injuries.
• Damage to eyes if the stipulated eye protection is not
worn.
18 | GB
• Damage to hearing if the stipulated hearing protection
is not worn.
• Residual risks can be minimised if the "Safety Instruc-
tions" and the "Intended Use" together with the oper-
ating manual as a whole are observed.
• Use the product in the way that is recommended in
this operating manual. This is how to ensure that your
product provides optimum performance.
• Furthermore, despite all precautions having been met,
some non-obvious residual risks may still remain.
WARNING
This power tool generates an electromagnetic field
during operation. This field can impair active or passive
medical implants under certain circumstances. In order
to prevent the risk of serious or deadly injuries, we rec-
ommend that persons with medical implants consult
with their physician and the manufacturer of the medical
implant prior to operating the power tool.
WARNING
In case of extended working periods, the operating per-
sonnel may suffer circulatory disturbances in their
hands (vibration white finger) due to vibrations.
Raynaud's syndrome is a vascular disease that causes
the small blood vessels on the fingers and toes to
cramp in spasms. The affected areas are no longer
supplied with sufficient blood and therefore appear ex-
tremely pale. The frequent use of vibrating products can
cause nerve damage in people whose circulation is im-
paired (e.g. smokers, diabetics).
If you notice unusual adverse effects, stop working im-
mediately and seek medical advice.
ATTENTION
The product is part of the 20V IXES series and may on-
ly be operated with batteries of this series. Batteries
may only be charged with battery chargers of this se-
ries. Observe the manufacturer's instructions.
WARNING
Follow the safety and charging instructions
and correct usage given in the instruction
manual of your 20V IXES Series battery and
charger.
charging process and further information are
provided in this separate manual.
6
Technical data
Cordless hedge trimmer
Engine voltage
Idle speed n
Cutting length
Cutting thickness
Blade length
Cutting movements
Weight (without battery)
www.scheppach.com
A
detailed
description
0
of
the
C-HT570-X
20 V
18000 rpm
510 mm
16 mm
560 mm
2400 rpm
2.13 kg
