Idiomas disponibles
Idiomas disponibles
FR 200 • Operating Manual
Safety stickers on the machine
Warning fire hazard substances
(For internal combustion engines only)
Warning: hot surface
Safety shoes must be worn
Ear protectors must be worn
Damaged or lost safety stickers must be replaced immediately. These stickers are obtainable
from your Customer Service Center.
USE FOR THE INTENDED PURPOSE
The machines are designed exclusively to treat all kinds of horizontal surfaces. Any other use
does not correspond to the intended purpose. The manufacturer declines all liability for damage
caused thereby. Surface preparation machines always attack the surface to be treated. They
are therefore not suitable for cleaning sensitive surfaces (such as tiled floors) (See chapter
"Field of application" on page 8).
Residual risk
There is still a residual risk owing to differing characteristics of the floor coverings, even if the
machine is used in accordance with applicable regulations. If you detect irregular cutting, you
must reduce the working depth or check the cutting drum and cutters.
Safety and responsibility at work
• Make your contribution to safety at the workplace.
• Report any discrepancy deviating from normal working immediately to the responsible
person.
• Perform all the work with an awareness of the need for safety.
Further safety instructions
Make sure to comply with your local or national regulations, standards and directives.
FIELD OF APPLICATION
Depending on the cutter type, hard, brittle to firm or elastic surface materials can be worked e.g.:
• Asphalt and cast asphalt surfaces
• Concrete and cement, synthetic stone, floor tiles
• Screeds of cement, wood cement, ceramic etc.
• Natural stone
• Metals
• Thermoplastic materials
Surfaces made of highly elastic soft materials or fabrics and fiber materials cannot be worked,
or can only be worked with certain limitations e.g.:
• Latex, rubber, soft plastics and foam materials
• Wood, carpets and woven materials
8
Use for the intended purpose
Warning: electric shock hazard
Warning: cutter shaft
Study the Operating Manual
Use protective googles
