Idiomas disponibles
Idiomas disponibles
EN
NL
1. ON/OFF button
2. Battery charge indicator
3. Speed indicator
4. Horn button
5. Speed decrease button
6. Speed increase button
7. Joystick
3.3.1
Technical protections
For your own safety, and to prevent that the wheelchair gets damaged, movements are monitored
by the electronics. This may result in speed decrease or complete stop.
To avoid accidental battery run down, your wheelchair is equipped with an automatic power
shutdown system. This system switches off the operating console automatically when it is not
operated for a while. If this occurs, simply switch your console back on.
Make sure that the free-wheel lever is in braking position BEFORE switching the wheelchair
ON. Electromagnetic brakes do NOT function if the wheelchair is in free-wheel mode. This is
indicated on the operating console. Driving is not possible.
3.3.2
Driving
1. Press the ON/OFF button (1) to switch on the wheelchair.
2. If the lights of the battery charge indicator (2) and speed indicator (3) go on, the wheelchair
is powered and ready to go.
3. Check the battery status indicator. Charge the battery if necessary (see §3.7).
4. Adjust the driving speed: decrease the speed with the speed decrease button (5), or increase
the speed with the speed increase button (6).
5. Start moving the wheelchair by operating the joystick (7) slowly forwards/backwards.
6. The speed will increase when you push the joystick further out of the centre.
7. To turn left or right, push the joystick to the left or right.
8. To brake, move the joystick to neutral position.
9. Press the horn button (4) to alert other road users if necessary.
10. After arrival, check the battery status and press the ON/OFF button to switch off the
wheelchair.
11. Charge the battery if necessary.
3.4
Brake and free-wheel lever
CAUTION
Only operate the free-wheel lever when your wheelchair is turned OFF. An attendant
should operate the free-wheel lever. NEVER operate it from sitting position.
Do not use the free-wheel mode on slopes and inclinations, see symbol on motor.
Make sure that the free-wheel lever is in its braking position BEFORE switching the
wheelchair ON. Electromagnetic brakes do NOT function if the wheelchair is in free-wheel
mode. This is indicated on the operating console. Driving is not possible.
Risk of injuries or damage
4
2
1
3
5
10
Plego
2023-09
Using your wheelchair
6
7
