BGS technic 80002 Manual De Instrucciones página 6

MOUNTING
1. Remove the pressure screw (4) and attach the cover (5).
2. Install injection pump in correct position.
3. Push the mounting screw (6) through the pump plate to engage the injection pump
4. Apply a little molybdenum disulfide grease to the underside of the screw head.
5. Turn the mounting screw clockwise with a suitable wrench to pull the injection pump back into
the drive whee.
NOTE
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
[email protected]
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed