Idiomas disponibles
Idiomas disponibles
ANNEX I Quick Start
START / SHUTDOWN WHEN EITHER '+'OR '-' BUTTON IS
PUSHED FOR 3 SECONDS
At start the blower unit will show the manufacturers logo.
At the same time the unit will check the warnings by playing
a 'beep', show a visual light next to the display and starts to
vibrate.
Home Screen
Select Language
Follow the menu selection by pushing the '+' button to go down and the '-' button to go
back up. To select push the '+' button for 3 seconds.
Ones the selections have been set and confirmed these will be stored. The unit will now
start to operate, supplying the right amount of airflow for the
selected filter and facepiece.
The airflow can be adjusted for personal comfort by pushing
the '+' button.
In case required the 'stored' setting can be
adjusted. For example when a different facepiece
is or different filters are required by the user
of the blower unit.
In such a case the following steps are required:
-
Push the '+' and '-' button for 3 seconds at the same
time.
-
You will now enter the selection menu and can
go up and down the menu by pushing the '+'
or '-' button shortly.
-
To select push the '+' again for 3 seconds.
FILTER TIMER
In certain circumstances it is optional to set a filter timer. For
24
RSG Safety BV | Powered Air Purifying Respirator T-Air® | June 2021
Unit Calibrates
Select Facepiece
Select Filter Type
Add Flow
Menu Selections
Filter Timer
GB
instance an Hg filter should not be used longer than 50 hours.
• -
In such a case follow the below steps to set the FILTER TIMER
• Push both buttons at the same time to enter the 'Menu Selection'
• Push the '+' button shortly to go to 'Filter Timer'
• Now hold the '+' button for 3 seconds to enter the Filter Timer Menu.
• Push the '+' button to select the preferred time fram. Each block is 50 hours. (Max 500
hours)
• For resetting the Filter Timer follow the same steps to enter the Filter Timer Menu.
Now select Reset timer.
• One's a time frame has been selected this is shown on the main menu under Alarm
200 / 200 hrs.
• The unit will automatically counts the hours selected and will warn the user by the
give alarms as soon as the time expires.
•
•
•
•
•
•
Menu Selections Tilter Timer
Reset Timer
DIAGNOSTICS
In the diagnostics menu the number of warnings caused by
low batteries or saturated filters can be viewed as well as the
battery currency, flow rate and rpm of the blower.
Also the service time and running time are recorded here.
GB
RSG Safety BV | Powered Air Purifying Respirator T-Air® | June 2021
Display Hood 2X P3 Alarm 100
160
Diagnostics Overview
25
