Clock Setup; Timer Setup - Lenco KCR-11 Manual De Usuario

CLOCK SETUP

1. Turn off the unit in Standby mode.
2. Press and hold the CLOCK SET button to enter the Clock setup. "24H" or "12H" will be displayed.
3. Press the or button to toggle between 24H (display 24 hours format) or 12H (display 12 hours format). Press the CLOCK
SET button to confirm.
4. Press the or button to adjust the hour and minute respectively. Press the CLOCK SET button to finish the clock set.

TIMER SETUP

1. Press the TIMER button to enter the Timer setup.
2. Press the or button to adjust the minute and second respectively. Press the TIMER button.
3. Press the or button to enable (on) or disable (OFF) the timer seup. When it is set to on, press the TIMER button to finish the
timer setup. It will start to count down.
4. During the timer count down, the TIMER LED indicator will keep flashing.
5. During the timer count down, press the TIMER button will stop the count down. TIMER LED indicator is still turned on but
without flashing. Further pressing the TIMER button will resume the count down. TIMER LED indicator will keep flashing.
6. During the timer count down, press and hold the TIMER button will cancel the count down.
7. When the timer count down is finished, the alarm buzzer will be turned on. Press TIMER button will stop the buzzer.
LIGHT ON/OFF
Slide to LIGHT ON/OFF switch on the front panel to turn on or turn off the downward lighting.
8