Idiomas disponibles
Idiomas disponibles
Unloading
Carefully drive the truck to the desired
location.
Carefully drive the truck to the unloading
area.
Lower the load until the fork arms are free
from the pallet.
Back the truck away in a straight line.
Raise the forks to proper height.
CAUTION
If the field of vision is poor, ask a guide for
assistance.
1.2.9
Using the truck on a slope
i
NOTE
Incorrect use of the truck on slopes
places stress on the traction motor,
brakes and battery.
Be particularly careful near slopes:
Never attempt a slope with a gradient
greater than that specified in the truck's
data sheet. Make sure that the ground is
dry with a non-slip surface and that the
route is clear.
Ascending slopes
Always ascend slopes travelling in the
reverse direction, with the load facing
uphill. Without a load, it is recommend to
ascend slopes forwards.
Descending slopes
Travel down slopes must always be
forwards, with the load uphill. Without
a load, it is recommended to descend
slopes forwards. In all cases, travel at a
very low speed and brake very gradually.
B
17
Fig0000-00085OM
Fig0000-00141OM
Fig0000-00142OM
REV. 09/2021
