Idiomas disponibles
Idiomas disponibles
1.2.7
Drive directions
The drive directions of the truck are forward (1)
and reverse (2).
1.2.8
Loading
•Approach the load carefully.
•Adjust the height of the forks until they
can be easily inserted into the pallet.
•Insert the forks under the load.
•If the load is shorter than the forks,
position the forks so that the front of
the load overhangs them by a few
centimeters, to avoid interference with the
load immediately ahead.
•Raise the load a few centimeters above
its support.
•Back the truck away from the stack or
any neighboring loads, gently and in a
straight line.
Transporting loads
Always carry loads in the forward direction
of travel (R) in order to have the best
visibility.
When carrying a load on a slope, always
ascend or descend with the load uphill.
Never drive sideways across a slope or
perform a U-turn.
Reverse travel (F) is to be used solely for
unloading. Since visibility is reduced when
travelling in this direction, drive only at
very slow speed.
REV. 09/2022
1
F
B
16
2
Fig0000-00072OM
R
Fig0000-00078OM
