Idiomas disponibles
Idiomas disponibles
15.Service
Daily Maintenance
No. Maintenance content Method of operation
1
Check if battery
capacity is too low
2
The battery pack
charge and
discharge current
3
Connector pins at
the bottom of the
battery(if necessary)
4
Check whether
the appearance is
deformed, whether
the surface is
oxidized, paint
removing, the
mounting position
is offset, and the
cabinet is damaged;
5
Check the entire
battery as well as
the surface beneath
it for signs of fluid
leakage.
REV. 09/2022
Check instrumentation
SOC display
Check instrumentation
display
Perform a visual
inspection
Perform a visual
inspection
Perform a visual
inspection
F
10
Note
Make sure the battery is
not stored without charge
for a long time. If the
battery system needs to
be put on hold for a long
time, it is best to keep the
battery in half power state
and charge the battery
every 3 months to ensure
that the battery system is
in half power state.
make sure battery pack
charge and discharge
current meet with
operation manual
If any ablation or
deformation occurs in
daily inspection, the
battery connector pins
should be replaced in
time.
check the reason for
analysis and give it a fix
check the reason for
analysis and give it a fix
Frequency
Everyday
Everyday
Everyday
Everyday
Everyday
