Honeywell VisionPRO TH8321R1001 Guia Del Usuario página 36

Ocultar thumbs Ver también para VisionPRO TH8321R1001:
Idiomas disponibles

Idiomas disponibles

Replacing indoor sensor batteries
Replace batteries in your indoor sensor when
a warning appears on the thermostat screen,
about 60 days before batteries are depleted.
When the sensor status light begins flashing
red, battery power is critically low and will be
depleted within 2–3 weeks. During normal
operation, the status light remains off.
To replace the batteries:
1 Remove the sensor from wallplate.
2 Install 2 fresh AAA alkaline batteries. If the
status light flashes green, batteries are
good; if it flashes red, you must use fresh
batteries.
3 Attach sensor to wallplate.
The sensor will restore communication with the
thermostat a few seconds after new batteries
are installed.
69-2761EFS—01
has low batteries
34
Indoor Sensor
MCR34146
M32990A
MCR32933
loading