Kaco blueplanet 29.0TL3 S Manual De Instrucciones página 50

9 | Configuration and operation
Zero current undervol-
4 4
1 2 3
tage threshold
0 – 104 [V] /
Corriente cero umbral
de sobretensión
253 – 340 [V] /
[V]
Limitación de corriente
4
1 2 3 4
reactiva
0 – 100 [% Imax] /
100 [% Imax] /
Tiempo de soporte mí-
1 2 3 4 4
nimo
1,000 – 15,000
[ms] /
10
Cond. de conexión
1 2 3 4 4
Min. switch-on voltage
1 2 3 4 4
after grid monitoring
184 - 219 [V] /
[V]
Max. switch-on voltage
after grid monitoring
219 - 248 [V] /
[V]
Min. switch-on fre-
1 2 3 4 4
quency after grid moni-
toring
Max. switch-on fre-
quency after grid moni-
toring
47.50 [Hz] – 51.50
[Hz] / 0.01 Hz
Tensión de conexión
1 2 4 4
3
mín. tras error de la
red
Tensión de conexión
máx. tras error de la
red
219 – 248 [V] /
[V]
Frecuencia de conexión
1 2 3 4 4
mín. tras error de la
red
Frecuencia de conexión
máx. tras error de la
red
47.5 – 50.05 [Hz] /
0.01 Hz
Página 50
F Set the voltage threshold for zero current mode.
1 [V]
1
F Set the reactive power limitation.
1
F Set the minimum support time.
5,000 [ms]
AVISO: The device checks the grid voltage and grid frequency.
The grid feed-in mode begins if the measurements are within
the set ranges.
F Set minimum and maximum values ​ ​ f or connection.
F Set min. and max. switch-on voltage after grid monitoring.
1
1
F Set min. and max. switch-on frequency after grid monitoring.
F Set min. and max. switch-on voltage after grid monitoring.
1
F Set min. and max. switch-on frequency after grid monitoring.
Manual
Kaco blueplanet 29.0TL3