Kaco blueplanet 29.0TL3 S Manual De Instrucciones página 39

Manual
Country- Me- Display/
spec. Set- nu Setting
tings level
Guardar en USB
1 2 3 4 4
Ajustes
2
1 3 4 4
Idioma
4 4
1 2 3
Def. rend. tot.
1 2 3 4 4
0 [kWh] /
Interfaz
1 2 3 4 4
Priwatt
1 2 3 4 4
Modo de activac.
1 2 3 4 4
Tiempo de observ.
1 2 3 4 4
Umbral de potencia
1 2 4 4
3
Modo de funcion.
1 2 3 4 4
Tiempo de funcion.
1 2 3 4 4
Enc. rápido
1 2 3 4 4
Intervalo registro
1 2 4 4
3
1 / 5 / 10 / 15 [min]
Cop. seg. datos reg.
1 2 4 4
3
Pantalla
1 2 3 4 4
Kaco blueplanet 29.0TL3
Configuration and operation | 9
Action in this menu/meaning
AVISO: Opportunity to export the operating data to a connec-
ted USB storage device.
↻ You have connected a USB storage device to the device.
1. Select the data to be exported (year, month or day).
2. Press the Enter button.
ð The device writes the data to a connected USB storage device.
F Open the menu: Press the Right arrow button or Enter
button.
F Select the required language for the user interface.
AVISO: You can set the total yield to any value, for example,
when you have received a replacement device and want to
1 [kWh]
continue the recording from the present value.
F Select the Save button and confirm with the Enter button.
AVISO: The address must not be the same as the address of
another device or a Powador-proLOG device.
F Assign a unique RS485 bus address to the device.
F Open the menu: Press the Right arrow button or Enter
button.
AVISO: Re-activation depends on the operating mode selected
and on the activation conditions.
F Activate function for a cycle
F Set time span during which the power threshold must be exceeded
without interruption.
F Set power threshold from which the monitoring time up to activation
begins.
1. Power-dependent: the function remains active until below the set
power threshold.
2. Time-dependent: The function is active independent of the sunlight
for the set operation time.
AVISO: The menu option is only available in "Time-depen-
dent" operation mode.
F After connection, the function is active for the set operation time.
F Reduce the waiting times during the self-test by pressing theActi-
vate button.
F Specify the time period between 2 log data recordings.
AVISO: The device supports the backing up of all recorded
yield data to a connected USB storage device.
F Activate or disable log data backup
1. Configure the contrast setting for the display.
2. Set the length of time without user input after which the backligh-
ting of the LCD switches off.
3. Alternatively: Permanently activate or disable the backlighting by
selecting "On" or "Off".
Página 39