Idiomas disponibles
Idiomas disponibles
Assembly - Hanging the Fan
1
Attaching the mounting plate
to the electrical box
WARNING: To avoid possible electrical shock, turn the
electricity off at the main fuse box before wiring. If you
feel you do not have enough electrical wiring knowledge or
experience, contact a licensed electrician.
NOTE: For better fan performance, make sure the mounting
plate is level. Additional washers (FF) (not included) may be
needed to insert between the outlet box and mounting plate.
□
Turn the power off.
□
Loosen the two mounting screws (GG) supplied with the outlet
box (HH), but do not remove the screws (GG).
□
Securely attach the mounting plate (A) to the outlet box (HH)
by sliding the mounting plate (A) over the two mounting
screws (GG) supplied with the outlet box (HH).
□
Pull the 120-volt supply wires (the black, white and ground
wires) out of the outlet box (HH) and through the hole in the
mounting plate (A) and lay them to the side.
2
Hanging the fan motor assembly
□
Attach the trim ring (B) to the fan motor assembly (C) at the
opening of the motor housing. Make sure the slots of trim ring (B)
are on top.
□
Carefully lift the fan motor assembly (C) and hang the fan motor
assembly (C) on the hook of the mounting plate (A) by utilizing
one of the holes at the outer rim of the motor housing so that it is
securely suspended.
□
Connect the wiring to your fan according to step 3 "Making the
Electrical Connections".
7
Please contact 1-855-HD-HAMPTON for further assistance.
A
C
B
HAMPTONBAY.COM
