RS Pro RS-330 Manual De Instrucciones página 4

AC Clamp Meter/English
Specifications
Function Range & Resolution
2.000 AAC
20.00 AAC
AC Current
200.0 AAC
400 AAC
200.0 mVDC
2.000 VDC
DC Voltage 20.00 VDC
200.0 VDC
600 VDC
200.0 mVAC
2.000 VAC
AC Voltage
20.00 VAC
200.0 VAC
600 VAC
200.0 Ω
2.000K Ω
20.00K Ω
Resistance
200.0K Ω
2.000M Ω
20.00M Ω
Note: No Autoranging on the 200mV AC Voltage Range.
Clamp size Opening 0.9" (23mm) approx
Diode Test Test current of 0.3mA typical; Open circuit
voltage 1.5V DC typical.
Continuity Check Threshold <120Ω; Test current < 1mA
Low Battery Indication " BAT" is displayed
Overrange Indication "OL " is displayed
Measurements Rate 2 per second, nominal
4
Accuracy (% of reading)
± (2.5% + 10 digits)
± (2.5% + 4 digits)
± (3.0% + 4 digits)
± (0. 5% + 5 digits)
± (1.2% + 3 digits)
± (1.5% + 3 digits)
± (1.5% + 30 digits)
± (1.5% + 3 digits)
± (2.0% + 4 digits)
± (1.0% + 4 digits)
± (1.5% + 2 digits)
± (2.0% + 3 digits)
± (3.0% + 5 digits)
Input Impedance 7.8MΩ (VDC and VAC)
Display 3-1/2 digits (2000 counts) LCD
AC Current bandwidth 50/60Hz (AAC)
AC Voltage bandwidth 50/400Hz (VAC)
Operating Temperature 14 to 122°F (-10 to 50°C)
Storage Temperature -14 to 140°F (-30 to 60°C)
Relative Humidity 90%(0°C to 30°C); 75%(30°C to 40°C); 45%
(40°C to 50°C)
Altitude Operating: 3000m; Storage 10,000m
Over voltage
Category III 600V
Battery
2 x 1.5V "AAA" batteries.
Auto OFF
approx. 15 minutes
Dimensions/Weight
200x50x35mm/200g
Safety
Indoor use only
Pollution Degree 2
Installation Category III
Measurement Category Application
Measurements on circuits not directly
connected to mains.
Examples include: Measurements on battery
powered equipment and specially protected
(internal) mains-derived circuits.
Measurements on circuits directly connected
to the low voltage installation.
Examples include: Household appliances,
portable tools and similar equipment.
Measurements performed in the building
installation.
Examples include measurements on
distribution boards, junction boxes,
socket-outlets and wiring and cables in the
fixed installation.
Measurements performed at the source of the
low-voltage installation. Examples include
measurements on primary overcurrent
protection devices and electricity Instruments
AC Clamp Meter/English
5