Idiomas disponibles
Idiomas disponibles
ADJUSTMENTS
ATTACHING/REMOVING VACUUM
ADAPTORS
See Figure 24, page 22.
The provided vacuum adaptors provide dust free routing.
To attach/remove the vacuum adaptor to the plunge
base:
Unplug the router.
Remove the vacuum adaptor screws on the subbase by
turning counterclockwise.
Place the plunge base vacuum adaptor on the plunge
base with the screw openings lined up with the screw
holes on the bottom of the subbase.
Reinsert vacuum adaptor screws.
Turn clockwise to tighten.
To remove, turn screws counterclockwise.
To attach/remove the vacuum adaptor to the fixed
base:
Unplug the router.
Using the supplied screws, place the fixed base vacuum
adaptor on the fixed base with the openings in the vacuum
adaptor lined up with the screw holes on the back of the
base.
Insert the supplied vacuum adaptor screws.
Turn screws clockwise with a screwdriver to tighten.
To remove, turn screws counterclockwise.
15 - English
