Idiomas disponibles
Idiomas disponibles
▸
Only push/pull the machine in the direction of
the arrow [1] (work in up-cut mode). Otherwise
there is a risk of the machine jumping uncontrolled
out of the cut. Work with moderate feed adapted
to the material being cut.
▸
Once the groove is complete, switch off the
machine and hold still until the diamond cut-off
wheel has come to a stop. Never try to pull
the diamond cut-off wheel out of a cut
while it is still running as this could result
in kickback.
▸
Guide the machine upwards up to the stop.
Der unlocking level [3] engages.
3
▸
Put away machine.
Information
For special applications, the protective
guard can also be used without a foot
part [11]. The attachment and removal
of the foot part is described in Section
"Attaching accessories".
Maintenance
Before any use check for missing, worn,
broken, cracked or damaged parts. Do not
use a defective or incomplete protective guard.
Accessories and spare parts
If, in spite of careful manufacturing and test proce-
dures, the device becomes faulty, contact Würth
masterService to arrange a repair.
With any enquiries or spare parts orders, always
quote the item number as given on the device type
plate.
The latest spare parts list for the device is available
online at http://www.wuerth.com/partsman-
ager. Alternatively, contact your local Würth agency
for a hardcopy.
Disposal
Do not dispose of this device with
household waste. Dispose of the device
via an approved waste disposal
company or via your local authority
waste disposal facility. Observe the
currently valid regulations. In case of doubt, contact
your waste disposal facility. Dispose of all packag-
ing in an environmentally compatible manner.
17
