Idiomas disponibles
Idiomas disponibles
Technical data
The maximum permissible diameter of the diamond
cut-off wheel is 125 mm (5").
The maximum permissible diamond cut-off wheel
thickness is 6 mm (1/4")
Intended use
The cut-off grinding protective guard is intended for
attaching original Würth angle grinders with the
designation
SWS 125 Power, EWS 125-S Fixtec,
EWS 125-ES Fixtec, EWS 17-125 Q Power,
EWS 17-125 Power, EWS 14-125-S Fixtec,
EWS 14-125 E Universal, EWS 14-125 EQ Universal,
EWS 12- 125 Solid, EWS 12-125 T Solid,
EWS 10-125 Compact, EWS 10-125
The cut-off grinding protective guard is intended
to cut or slit mineral materials, e.g. ferro-concrete
and brickwork, when held securely on the substrate
without the use of water.
The spindle of the angle grinder must not have a fine
thread (M14x1.5 mm), see operating instructions of
the angle grinder.
Intended for commercial use in industrial or work-
shop environments.
▸
Only use a diamond cut-off wheel. Do not use
conventional cut-off wheel or any other accesso-
ries.
▸
Do not use on metallic materials.
▸
Materials which emit health-endangering dusts or
vapours during cutting must not be cut.
▸
Only work with a suitable dust extraction system:
Connect a suitable vacuum cleaner (class M) to
the suction connection [5]. We recommend the
use of an antistatic Ø 35 mm suction hose.
▸
Generally recognised accident prevention regula-
tions and the enclosed safety instructions must be
observed.
▸
Observe the operating instructions of the attached
angle grinder.
The user is liable for any damage in the
event of improper use.
Elements
1 Only push the machine in the direction of the
arrow
2 Auxiliary handle (of the angle grinder) *
3 Unlocking lever
4 Spindle locking knob (of the angle grinder) *
5 Suction nozzle
6 Clamping screw (cutting depth)
7 Rollers *
8 Guide rail adapter for attaching onto the Würth
guide rail *
9 Protective guard (complete)
10 Slider (for disassembly of the protective guard)
11 Foot part
12 Protective extraction hood
13 Lever (of the angle grinder) *
14 Clamping screw
15 2-hole-spanner
16 2-hole-spanner
17 2-hole clamping nut
18 Diamond cut-off wheel *
19 Spacer sleeve
20 Spindle (of the angle grinder) *
* not included within the scope of delivery
Start-up
Attaching the protective guard to the
angle grinder (fig. C)
▸
Disassemble the dust extraction hood [12] and
foot part [11] as is described in Section "At-
taching accessories".
▸
Press and hold lever [13]. In the position shown,
set the angle grinder onto the protective extraction
hood [12].
▸
Release the lever and turn the protective ex-
traction hood until the lever [13] engages.
▸
Check that the dust extraction hood is secure: The
lever must be engaged and it must not be possible
to turn the protective extraction hood.
▸
If required, tighten the clamping screw [14].
▸
Dissemble the dust extraction hood [12] and foot
part [11] as is described in Section "Attaching
accessories".
▸
Attach auxiliary handle [2]. See Section "At-
taching auxiliary handle" (removal in reverse
order).
15
