Idiomas disponibles
Idiomas disponibles
• Put the ingredients, after having first chopped into
small pieces, into the jar with liquid (do not exceed the
maximum marker).
• Put the lid on the jar. Make sure it is properly fixed in
place.
• Put the measuring cup on the lid.
• Connect the appliance to the mains.
• Choose the desired speed and start blending.
• If you wish to add more ingredients, pull out the
measuring cup.
• Add the ingredients and replace the measuring cup.
• To stop the appliance, set the speed back to "0".
• Turn the appliance on by selecting the desired speed in
the speed selector.
• The illuminated ring comes on. (H).
• To avoid a fierce start-up, it is advisable to start off from
the lowest speed position and, once the appliance has
been switched on, progressively increase the speed to
the desired position.
ELECTRONIC SPEED CONTROL
• The speed of the appliance can be regulated by using the
speed selector (I). This function is very useful, as it makes
it possible to adapt the speed of the appliance to the type
of work that needs to be done.
ONCE YOU HAVE FINISHED USING THE APPLIANCE
• Stop the appliance, selecting position "0" on the speed
selector.
• Unplug the appliance from the mains.
• Lift the jar from the motor body.
• Clean the appliance.
"PULSE / ICE CRUSH" FUNCTION
• The appliance works at the highest speed to achieve
optimal performance.
• Press this button to operate and release the button when
you wish to stop operating.
• This function gives optimal results for ice-crushing up to
desired snowy level.
• We recommend working by pressing the button in cycles
of 3 seconds, and repeating the operation until you obtain
the desired result.
SUPPLY CORD COMPARTMENT
• This appliance has a supply cord compartment situated
on its underside.
CLEANING
• Disconnect the appliance from the mains and allow it to
cool before undertaking any cleaning task.
• Clean the equipment with a damp cloth with a few drops
of washing-up liquid and then dry it.
• Do not use solvents or products with an acid or base pH,
such as bleach, or abrasive products, for cleaning the
appliance.
• Do not let water or any other liquid get into the air vents to
avoid damage to the inner parts of the appliance.
• Never submerge the appliance in water or any other liquid
or place it under running water.
• During the cleaning process, take special care with the
blades, as they are very sharp.
• It is advisable to clean the appliance regularly and
remove any food remains.
• If the appliance is not in good condition of cleanliness, its
surface may degrade and inexorably affect the duration
of the appliance's useful life and could become unsafe
to use.
• The following pieces may be washed in a dishwasher
(using a soft cleaning program) or soapy hot water:
- Jar
- Lid
- Measuring cup
• Then dry all parts before their assembly and storage.
SELF-CLEANING FUNCTION
• Put water and a small amount of washing-up liquid in the
jar.
• Select the function "Pulse".
REMOVABLE BLADES FOR EFFECTIVE CLEANING
• Loosen the blade fixing ring by turning it in a clockwise
direction. (Fig. 3). Remove the blade fixing ring, blade set
and sealing ring, and clean them. (Fig. 4).
• After cleaning, replace the blade set and turn the blade
fixing ring in the opposite direction.
