Idiomas disponibles
Idiomas disponibles
Safety instructions for maintenance
WARNING:
instructions that follow before you use the
product.
•
Only do the maintenance as given in this operator's
manual. Let an approved service agent do all other
servicing.
•
If the maintenance is not done correctly and
regularly, the risk of injury and damage to the
product increases.
•
Clean the product to remove dangerous material
before you do the maintenance.
•
Do the maintenance of the product on stable level
ground. Make sure that the product cannot move.
Introduction
WARNING:
safety chapter before you install the product.
WARNING:
protective equipment. Refer to
protective equipment on page 6 .
WARNING:
of a tank or above ground level must be
secured by a safety lifeline fall protection
system. Follow local applicable regulations.
WARNING:
wire ropes are clean and not damaged.
Make sure that the certificates for the steel
wire ropes, the rigging system and the winch
motors are valid.
WARNING:
assembled the product, they must go down
to ground level and keep a safe distance to
the product.
8
Read the warning
Installation
Read and understand the
Always use personal
Personal
Persons who are on top
Make sure that the steel
When the operators have
•
Do not make modifications to the product.
Modifications that are not approved by the
manufacturer can cause serious injury or death.
•
Replace damaged, worn or broken parts.
•
Do not use a pressure washer to clean the product.
•
Only use lint-free cleaning cloths.
•
Always use original accessories and spare parts.
Accessories and spare parts that are not approved
by the manufacturer, can cause serious injury or
death.
•
After maintenance, do a check of the vibration level
in the product. If it is not correct, speak to an
approved service agent.
•
Let an approved service agent do servicing on the
product regularly.
To adjust the drive wheels to the
diameter of the storage tank
•
If the diameter of the storage tank is larger than 25
m, set the drive wheels in the straight position.
2156 - 001 - 08.02.2024
Solución de problemas
