Idiomas disponibles
Idiomas disponibles
Troubleshooting of the remote control
Problem
The LED is red.
The LED slowly
flashes red 3 times.
The LED quickly
flashes red.
Transportation
WARNING:
transportation. The product is heavy and can
cause injury or damage if it falls or moves
during transportation.
CAUTION:
behind a vehicle.
•
Make sure that the power supply is disconnected
before transportation.
•
For transportation, lift the product to move it or put
the product on a vehicle.
•
Do not lift a damaged product. Make sure that the
lifting eyes are correctly installed and not damaged.
•
Always use the slowest speed when you lift the
product.
•
The cables on the lifting equipment must have
tension before you lift the product from the ground.
•
Do not walk or stay below or near a lifted product.
Keep bystanders away from the work area.
•
Make sure that you can see the product and the
work area when you lift the product.
•
Put protection on the product during transportation.
The protection keeps natural elements, for example
rain and snow, away from the product.
To lift the product
WARNING:
applicable lifting equipment.
16
Cause
The voltage in the batteries is low.
The batteries are empty.
The output in the receiver is not in operation
and there is no signal from the receiver.
Transportation, storage and disposal
Be careful during
Do not tow the product
Only lift the product with
Solution
Replace the batteries. Refer to
the batteries in the remote control on page
15 .
Replace the batteries. Refer to
the batteries in the remote control on page
15 .
Do a pairing operation. Refer to
ing operation of the remote control and the
product on page 11 .
•
Attach the lifting equipment to the 4 lifting points of
the product.
To attach the product to a
transportation vehicle
Use the lifting points to attach the product to the
transportation vehicle.
1. Attach the tie-down straps in the lifting points.
2. Attach and tighten the tie-down straps to the
transportation vehicle.
Storage
CAUTION:
storage outdoors. Always keep the product
indoors.
•
Keep the product in a dry and cool storage with
sufficient airflow.
•
Do not keep the product on the floor, let the product
hang above the floor.
•
Clean the product and do a complete servicing
before you put the product in storage.
To replace
To replace
To do a pair-
Do not put the product in
2156 - 001 - 08.02.2024
