Idiomas disponibles
Idiomas disponibles
•
If the diameter of the storage tank is 15–25 m, set
the drive wheels in the middle position.
•
If the diameter of the storage tank is smaller than
15 m, set the drive wheels in the maximum turned
position.
To install the product on a storage tank
WARNING:
product when you install the product.
2156 - 001 - 08.02.2024
Do not stay below the
1. Lift the product onto the roof of the storage tank.
Use applicable lifting equipment. Refer to
product on page 16 .
2. Install the 4 support wheels (A). Use 1 M16x150 bolt,
2 M16 washers, and 1 M16 locknut to install each
support wheel.
B
A
3. Add counterweights (B) to the product. Refer to
add and remove counterweights on page 10 .
4. Install the 2 steel wire ropes for the EBE 900 V shot
blaster in the 2 suspensions (C) for the steel wire
ropes.
To lift the
To
9
