Idiomas disponibles
Idiomas disponibles
Information on the
data plate
mA
6.4 Serial number
You can call up the serial numbers under
MENU → INFORMATION → Serial num-
ber. The 10-digit article number is located
in the second line.
6.5 CE marking
The CE marking shows that the products
comply with the basic requirements of the
applicable directives as stated on the de-
claration of conformity.
The declaration of conformity can be
viewed at the manufacturer's site.
6.6 Guarantee and customer
service
6.6.1 Guarantee
You can find information about the manu-
facturer's guarantee in the Country specif-
ics.
6.6.2 Customer service
The contact details for our customer ser-
vice are provided on the back page or on
our website.
6.7 Recycling and disposal
▶
The competent person who installed
your product is responsible for the dis-
posal of the packaging.
If the product is labelled with this
mark:
▶
In this case, do not dispose of the
product with the household waste.
20
Meaning
Rated current
Read the instructions
Operating and installation instructions 0020323630_00
▶
Instead, hand in the product to a collec-
tion centre for waste electrical or elec-
tronic equipment.
If the product contains batteries that
are labelled with this mark, these batteries
may contain substances that are hazard-
ous to human health and the environment.
▶
In this case, dispose of the batteries at
a collection point for batteries.
-- Packaging
▶
Dispose of the packaging correctly.
▶
Observe all relevant regulations.
6.8 Product data in accordance
with EU Ordinance no.
811/2013, 812/2013
On units with integrated weather-com-
pensated controls, including a room ther-
mostat function that can be activated, the
seasonal room-heating efficiency always
includes the correction factor for control
technology class VI. The seasonal room-
heating efficiency may deviate if this func-
tion is deactivated.
Temperature control class
Contribution to the seasonal
room-heating energy effi-
ciency ɳs
6.9 Technical data – System
control
Rated voltage
Rated surge voltage
Pollution degree
Rated current
Supply line cross-section
IP rating
Protection class
Temperature for the ball
pressure test
Maximum permitted environ-
mental temperature
V
3.0 %
9 to 24 V
330 V
2
< 50 mA
0.75
... 1.5 mm²
IP 20
III
75 ℃
0 ... 60 ℃
