Idiomas disponibles
Idiomas disponibles
PT-SR
CONTENTS
RIVET GUN IDENTIFICATION ......................................
SAFETY MEASURES .....................................................
DISPOSAL AND RECYCLING.........................................
RIVET GUN DESCRIPTION ..........................................
TECHNICAL SPECIFICATIONS .....................................
RIVET GUN CAPACITY .................................................
PACK CONTENTS........................................................
RIVET GUN PARTS........................................................
PREPARING THE RIVET GUN.........................................
START-UP.....................................................................
AIR SUPPLY..................................................................
NOZZLES.....................................................................
MANDREL...................................................................
MAINTENANCE............................................................
ADDING OIL...............................................................
WARRANTY .................................................................
TROUBLESHOOTING ..................................................
SPARE PARTS ..............................................................
EXPLODED DIAGRAM..................................................
RIVET GUN IDENTIFICATION
The PT-SR rivet gun is identified by a serial number
on the bottom of the rivet gun, along with the logo,
manufacturer's
website,
recommended air pressure.
SAFETY MEASURES
Read the entire instruction manual carefully
before installing, using or repairing this tool.
Always keep this instruction book near the tool.
• Do not use the machine for any purpose other
than fixing speed rivets. The riveter must not be used
as a hammer.
• Use ONLY the spare parts and accessories
supplied by BRALO.
www.bralo.com
markings
Appropriate clothing should be
worn to avoid entanglement
with the tool; protective glasses
for the operator and those
around him; and gloves.
EN
• The user must maintain the riveter under safe
11
working conditions and should regularly inspect it
11
for proper operation. Repairs should only be
11
carried out by qualified professionals. If in doubt,
12
12
return the tool to your dealer or to BRALO, SA.
12
• Do not operate a tool that is pointing towards
12
any person or at the operator themselves.
12
• Never exceed the tool's rated air pressure limit.
12
• The tool should not be used without the mandrel
13
collector attached. This prevents spent shafts from
13
being freely projected, creating a hazard for the
14
user and any nearby personnel.
15
16
• We recommend emptying the spent mandrel
16
collector regularly.
16
• When the tool is transported from one location
17
to another, keep hands and fingers away from the
67
trigger button in order to prevent any inadvertent
72
operation.
• When the tool is not in use, or when adjusting or
removing a nozzle, the compressed air supply
must be fully detached for safe operation.
• When not in use, store the tool securely so that
it cannot fall to do the ground.
and
• The tool must be operated at all times in
accordance with prevailing health and safety laws
and regulations.
• The continuous sound pressure level present in
the workplace should not exceed 80 dBs. It is
advisable to wear protective hearing gear
(earplugs, cancelling earmuffs, etc.).
Safety Data Hyspin VG32 Oil: Wash your hands
with soap and water. In case of ingestion see a
doctor. It is not a primary irritant to the eyes, but it
can cause irritation afterwards, wash with plenty
of water for several minutes. The flash point is
232 ° C. Not classified as flammable. Its
extinguishing with Co2, dry powder, foam or
water mist, do not use water. Dispose of at
approved sites and can be recycled. Wear
protective glasses, waterproof gloves and a plastic
apron.
DISPOSAL AND RECYCLING
To dispose of and recycle the parts of
the
riveter,
provisions of national laws.
11
carefully
follow
the
