Parkside PSSSA 20-Li B2 Traduccion Del Manual De Instrucciones Originale página 28

GB MT
batteries designed for the pur-
pose. The use of other batteries may
result­in­injuries­and­risk­of­fire.
c) Keep the unused battery away
from paper clips, coins, keys,
nails, screws and other small
metal objects, which could cause
bridging of the contacts. A short
circuit between the battery contacts
may­cause­burns­or­fire.
d) If used incorrectly, liquid may
leak from the battery. Avoid
contact with this. In the event of
accidental contact, rinse off with
water. If the liquid gets into eyes, seek
medical­assistance.­Leaking­battery­fluid­
may cause skin irritations or burns.
e) Do not use damaged or altered
batteries. Damaged or altered batte-
ries can be unpredictable and lead to
fire,­explosion­or­risk­of­injury.
f) Do not expose batteries to fire
or elevated temperatures. Fire or
temperatures­over­130 °C­can­cause­
an explosion.
g) Follow all instructions for char-
ging and never charge the bat-
tery or the battery-powered tool
outside the temperature range
stated in the operating instruc-
tions. Incorrect charging or charging
outside the permitted temperature ran-
ge may destroy the battery and increa-
se­the­risk­of­fire.
6) SERVICE
a) Have your power tool serviced
by a qualified repair person
using only identical replacement
parts. This will ensure that the safety
of the power tool is maintained.
b) Never repair damaged batte-
28
ries. All battery repairs should be
carried out by the manufacturer or au-
thorised­customer­service­centres­only.
Safety information for
sawing back and forth
•­ Hold the electric tool by the in-
sulated gripping surfaces when
performing work in which the
cutting tool may come into con-
tact with hidden wiring. Contact
with­a­live­wire­can­also­cause­a­
charge­in­metal­parts­of­the­device­and­
result in an electric shock.
• Fasten and secure the workpie-
ce by means of clamps or with
another method on a stable un-
derground. If you hold the workpiece
only with your hand or against your
own body, it will stay instable and this
can lead to a loss of control.
• Do not use any accessories
that are not recommended by
PARKSIDE. This can result in electric
shock­or­fire.
•­ Keep­hands­away­from­the­sawing­
area. Do not reach underneath the
workpiece. Upon contact with the bla-
de there is a risk of injury.
•­ Move­the­power­tool­against­the­work-
piece only when it is turned on. Other-
wise, there is a risk of kickback if the
attachment tools jam in the workpiece.
•­ Make­sure­that­the­support plate is res-
ting securely on the workpiece during
sawing. A tilted saw blade may break
or cause a kickback.
•­ After­you­have­finished­work,­turn­the­
power tool off and do not pull the saw
blade out of the cut until it has come to
a­standstill.­In­this­way­you­will­avoid­
any kickback and can safely put down