46
i) )
2
PLAYBACK
Turn on the TV (or Component TV), and select
the channel! for viewing a playback picture (or
set the TV/VIDEO selector to VIDEO).
1 Set the POWER switch to PLAYER, and insert
a casette.
2 Press the <4 button. [T-2]
Playback will start.
To stop the tape, press the m button.
After using, be sure to set the POWER switch of
the recorder to OFF.
To get a still picture
Press the #9 button during playback. To resurne
playback, press the #8 button again.
Notes
¢ If you move the position of the POWER switch
during playback, the tape will stop. When you
move the POWER switch to CAMERA in the
playback pause mode, however, the unit will enter
recording pause mode.
When the pause mode lasts for 7 minutes or
more, the unit will automatically enter the stop
mode.
The playback picture quality of a tape recorded in
LP mode is not as good as that of an SP-recorded
tape.
Streaks will appear and the sound will be muted
in the still picture.
Notes
* If you move the position of the POWER switch
during playback, the tape will stop. When you
move the POWER switch to CAMERA in the
playback pause mode, however, the unit will enter
recording pause mode.
When the pause mode lasts for 7 minutes or
more, the unit will automatically enter the stop
mode.
The playback picture quality of a tape recorded in
LP mode is not as good as that of an SP-recorded
tape.
Streaks will appear and the sound will be muted
in the still picture.
To view the picture which has been recorded on
this unit, set a monitor switch of the video
cassette recorder for playback to the STD
(standard) position.
¢ When recording on this unit using the tape on
which the PCM stereo sound has previously been
recorded, set the monitor switch of the video
cassette recorder for playback to the STD
(standard) position. Otherwise, the sound may not
be heard or may be damaged.
