Idiomas disponibles
Idiomas disponibles
ELECTRICAL CONNECTION OF THE MURAL UNIT
1. Open the front panel of the unit (1 Fig-2)
2. Remove the plastic COVER on the right side the indoor unit (2 Fig-2)
3. Make the connections referring to the wiring diagrams of the unit.
4. Turn upside down the cover (3 Fig-2) and Close the cover with the supplied
screws.
5.Close the front panel of the unit (1 Fig-2)
Note:
The yellow/green wire to be 20 mm longer than other wires.
ELECTRICAL CONNECTION
For units equipped with plug, as indicated in the wiring diagrams supplied with the
appliance, the electrical
connection is made by inserting the power supply plug of the unit into a mains
power socket. The power supply of the outdoor unit is drawn from the indoor one.
For the other units, comply with the recommendations in the "Electrical
Connections" section.
Note: The plug for the power supply cable must be provided with regular earth
connection and must comply with the requirements indicated in the technical data
table.
22
MACHINE INSTALLATION
Fig.2
1
2
COVER
3
Fig.3
