Idiomas disponibles
Idiomas disponibles
4.
Place the Inlet Assembly on top of the Pre-Filter Cartridge; rotate the Inlet Assembly
approximately 1/8 turn clockwise so that the tubing is in line with the Wand's stem.
5.
Using padded or locking pliers, remove the existing aerator from your faucet.
6.
Remove the protective wrapping from the Diverter Valve assembly and thread the
Diverter Valve onto the faucet; "hand–tighten" only. Do not over tighten as it could
damage the threads. If the diverter valve is not compatible with your faucet, try
the adapters included, if they don't work, contact Rena Ware Customer Service for
assistance.
EN
9
