Idiomas disponibles
Idiomas disponibles
MAINTAINING THE PRE-FILTER
IMPORTANT: NEVER BACK-FLUSH THE MAIN FILTER. Back-flushing the
Main Filter will damage its internal structure, causing the filter to become ineffective.
Back-flushing can also contaminate the downstream media of the Main Filter so that
it will no longer filter properly.
BACK-FLUSHING THE PRE-FILTER
You should back-flush the Pre-Filter (up to three times) when a significant reduction in
flow occurs. The disposable EM Media Insert should be replaced if back-flushing the Pre-
Filter fails to restore acceptable flow.
Note: Back-flushing the Pre-Filter will require two people.
1.
Make sure the water is turned off and remove the cover.
2.
Remove the Back-Flush adapter from the Inlet Assembly.
3.
Remove the Inlet Assembly by turning it counterclockwise until it releases.
4.
Remove the Pre-Filter from the Main Filter by turning it counterclockwise until it
releases.
14
2
