Idiomas disponibles
Idiomas disponibles
CLEANING OR REPLACING
THE PRE-FILTER MEDIA INSERT
Clean the EM Media Insert regularly between replacements to extend the life of the cartridge.
We suggest wearing protective gloves when handling the cartridges.
To clean:
1.
Open the housing by turning the top counterclockwise and remove the media by
grabbing the base of the housing with both hands and pushing the end cap of the
media forward.
2.
Wash the reusable housing and rinse off the media insert with water and dry. When
washing the media mild rubbing is acceptable. Do not scrub the exterior of the media
too hard as it can be damaged permanently. DO NOT USE SOAP.
3.
After cleaning, insert the media with the punt up.
16
punt
punt
outlet nipple
