Dial Mode; Flash Time; Registering A Handset - Amplicomms PowerTel 1700 Manual De Instrucciones

Dial mode

The standard dialling mode for analogue phones is "touch-
tone". On some older phone systems the dialling mode must
be set to "pulse". Please see your phone system's user guide
for more information.
1. In idle state press the menu key
2. Select Settings and press
3. Select Dial mode and press
4. Select Touch-tone or Pulse and press

Flash time

The use of supplementary services requires a flash signal of
a specific length. You can obtain information about available
supplementary services and the required flash time from
your telephone service provider.
1. In idle state press the menu key
2. Select Settings and press
3. Select Flash time and press
4. Select Short, Medium or Long and press

Registering a handset

You can connect up to 5 cordless handsets to your base unit.
New cordless handsets (PowerTel 1701, available as an
accessory) must be registered prior to use.
Registering a brand new PowerTel 1701:
1. In idle state press and hold down the Page key on the base
for approx. 6 seconds.
2. Place the handset in the charger. After a short time the hand-
set will be registered.
Helpline 0844 800 6503 (See page 23 for costs and hours of operation)
.
.
.
.
.
.
.
.
21