Idiomas disponibles
Idiomas disponibles
2. Push the battery into the battery holder of the
product. The battery locks into position when you
hear a click.
CAUTION:
move easily into the battery holder, the
battery is not installed correctly. This can
cause damage to the product.
3. Make sure that the battery is installed correctly.
Battery information
Refer to the operator's manual of the battery for
information about how to use the battery.
To start the product
1. Push and hold the start/stop button until the green
LED comes on.
2. Use the power trigger to control the speed.
To start the SavE function
The product has a power saving function. The SavE
function gives the longest operation time from the
battery.
1. Push the SavE button to start the function. The
green LED comes on to show that the function is
on.
12
If the battery does not
2. Push the SavE button again to stop the SavE
function.
Automatic shutdown function
The product has a shutdown function that stops the
product if it is not used. The green LED for start/stop
indication goes off and the product stops after 60
seconds.
To operate the product
To trim the grass
1. Hold the trimmer head immediately above the
ground at an angle. Do not push the trimmer line
into the grass.
2. Decrease the length of the trimmer line by 10-12
cm / 4-4.75 in.
3. Decrease the engine speed to decrease the risk of
damage to plants.
4. Use 80 % throttle when you cut grass near objects.
To clear grass
1. Keep the trimmer head above the ground.
2. Tilt the trimmer head.
3. Cut with the end of the trimmer line around objects in
the work area.
CAUTION:
that are hit by the trimmer line, increases
the wear on the trimmer line.
4. Use 80% speed when you cut and clear vegetation.
This decreases the wear on the trimmer head and
trimmer line.
Cut grass. Other objects
795 - 007 - 06.05.2022
