Idiomas disponibles
Idiomas disponibles
Fitting the UVC clarifier
How to proceed:
1. Open the hose clip of pipe collar DN 110 and push the pipe collar onto the outlet of the UVC
clarifier.
2. Position the UVC clarifier in the container and connect the outlet with the outlet of the con-
tainer using the pipe collar. Tighten the pipe collar.
3. Use fastening brackets to fasten the UVC clarifier on the container.
– The fastening brackets are fastened on the UVC clarifier and on the container wall.
4. Connect the outlet of the pump with the inlet of the UVC clarifier.
– Assembly material: (→ Combinations of UVC clarifier / filter pump)
5. Attach the switch box on the screws on the outer container wall. (→ Installing the switch box)
EN
BTN0063
47
