Idiomas disponibles
Idiomas disponibles
Assemble
Island Set
[]
Open both
cartons and remove alI packing
materials.
[]
Open Grill Lid and Refrigerator
door and remove packing
materials.
[]
Align the 3 individual components
and slide together
as shown.
[]
Be sure to attach the Regulator with Hose to both the
Grill and the Side Burner before securely placing the
island in position. (Please refer to Step 2.)
Note:
All measurements
are
in inches
Use your grill at least 3 feet away from any wall
or surface.
Do not obstruct the flow of air for combustion
and ventilation.
DO NOT lift Grill Island units from the table top
surfaces when moving or assembling
Island set.
Table
top surface
Install
Regulator
with Hose to Grill and Griddle
Side Burner
"H
[]
Unscrew the Bowl Rear Upper Panel from Bowl Rear Panel (Fig.l) then insert the connection hose through
the
hole on the cart right panel of the main grill and then through the hole on the cart left panel of
the griddle side grill. (see Fig. 2).
[]
Insert the electric wire set through the cart left panel of the griddle side grill and then push plug to
the socket of the electric wire, ensure the same color match (Fig. 3).
[]
Unscrew the Hose Holder from the Rear Cart Frame.Then
fix the hose by Hose Holder onto the Rear
Cart Frame (Fig. 3).
[]
Push back Sleeve of the Socket. See Figure A. Insert Plug then release Sleeve. See Figure B. Push Plug until
sleeve snaps forward locking the Plug into the Socket. See Figure C.
[]
Complete installation of Regulator with Hose for both Grill and Side Burner Plugs.
Figure
A
PLUG_
SOCKET
,SLEEVE
/
Figure
B
/
Figure C
\\ SLEEVE
\
Fig. 1
.........
.
\\\\
\,,\
/
',\
12
.... •.
Plug
Fig. 2
hose
hose
holder
