Idiomas disponibles
Idiomas disponibles
HANGING THE FAN (continued)
Step 11. Lift the motor assembly into position and place the hanger ball into the
Ceiling Mounting
ceiling mounting bracket. Rotate the entire assembly until the "Check Tab" has
Bracket
dropped into the "Registration Slot" and seats firmly. (Fig. 10)
The entire motor assembly should not rotate (left or right) when seated properly.
Check Tab
WARNING: Failure to reattach the cross pin and seat the "Check
Tab" can cause the fan to fall from the ceiling during operation. Take
Registration Slot
special care to make sure this pin is reattached.
Fig. 10
52" True | 9
