Idiomas disponibles
Idiomas disponibles
INSTALLING THE FAN BLADES
CAUTION: To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing fan
blades.
Step 1. Align the holes in the fan blade with the holes in the motor
assembly, and secure the fan blade to the motor assembly with the
fiber washers and blade screws provided. Tighten the blade screws to
secure the fan blades to the motor assembly. (Fig. 15)
NOTE: Install the fiber washers and blade screws through the open
slot in the mounting plate.
Step 2. Repeat this process to attach the other two blades.
INSTALLING THE DECORATIVE COVER
CAUTION: To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
decorative cover.
Step 1. Remove the three preinstalled mounting screws from the
outside edge of the decorative cover. Retain mounting screws. (Fig.16)
Step 2. Place the decorative cover over the mounting plate, aligning
the holes in the decorative cover with the holes in the mounting
plate. Thread the three mounting screws that were removed into the
decorative cover and mounting plate, and tighten to secure. (Fig. 16)
14 | KICHLER.COM
Motor
Assembly
Mounting
Plate
Fig. 15
Fan Blade
Blade
Fiber Washers
Screws
Blade
Screws
Hole
Mounting Plate
Mounting Screws
Decorative Cover
Fig. 16
