Idiomas disponibles
Idiomas disponibles
HANGING THE FAN
CAUTION: To avoid possible electrical shock, be sure you have
turned off the power at the main circuit panel.
REMEMBER to turn off the power before you begin installation.
This is necessary for your safety.
WARNING: All set screws must be checked, and retightened where
necessary, before installation.
To properly install your ceiling fan, follow the steps below.
Step 1. Remove the canopy trim ring from the canopy by turning the canopy
trim ring counter clockwise. (Fig. 5)
Step 2. Remove the ceiling mounting bracket from the canopy by removing
and saving one of the two screws. Loosen the remaining screw by a half turn.
(Fig. 5)
Step 3. Pass the 120 volt supply wires from the ceiling outlet box through the
center of the ceiling mounting bracket. (Fig. 6)
Step 4. Attach the ceiling mounting bracket to the outlet box using the
screws and washers included with the outlet box. (Fig. 6)
Canopy Trim Ring
Fig. 5
cULus
Electrical
Box
Ceiling Mounting
Bracket
Washer
(Supplied with Electrical Box)
Mounting Screw
(Supplied with
Electrical Box)
120V Wires
Fig. 6
Ceiling Mounting Bracket
Canopy
Washer
(Supplied with Electrical Box)
Mounting Screw
(Supplied with
Electrical Box)
52" True | 7
