Idiomas disponibles
Idiomas disponibles
EN
7. Pull out the whole track with driving wheel.
When removing or installing the tracks, be careful not to get your fingers caught between the track
and pulley.
8.7.3.
Model HT-MD-500C
Check the condition of the tracks periodically. If any track is cracked or frayed, it should be replaced as
soon as convenient.
1. Lift up the hopper and insert a support rod for safety purposes.
2. Lift the machine and set it on blocks or supports rated for the weight of the machine so that the tracks
are approximately 10 cm off the ground.
