Idiomas disponibles
Idiomas disponibles
EN
Gearbox Lubrication
The gearbox is pre-lubricated and sealed at the factory. Unless there is evidence of leakage or service has
been performed on the gearbox, no additional lubricate should be required until 50 hours use.
After first 50 hours use, change all the gear oil.
For future use, check the oil level after every 50 hours of use. If you remove the oil level plug and no oil
flows out, please add oil and then screw the oil level plug.
Gear oil GL-5 or GL-6, SAE80W-90 is recommended. Do not use synthetic oil.
When replacing gear oil, the engine must be stopped and still warm. Unscrew the filter cap and the drain
plug. When oil is drained, replace the drain plug, fill up with fresh oil, and then replace the filter cap.
1 – Oil Filler
2 – Oil Outlet
8.5.1.
Hydraulic Oil - HT-MD-500B model only
Unscrew the locking nut to drain the oil into the pan.
