Bianchi SPECIALISSIMA RC Manual Suplementaria página 4

EN
DECLARATION OF CONFORMITY
The manufacturer F.I.V.E. Bianchi S.p.A. located at Via delle Battaglie, 5 - 24047 Treviglio (BG), Italy, hereby declares that its products
conform with standard ISO4210. The products also conform with the provisions of Art. 50 of the Italian Highway Code (Italian Legislative
Decree no. 285 of 30 April 1992, as amended, and as amended by Art. 24/1 of Law no. 14 of 3 February 2003), as defined by Art. 2,
paragraph 1, letter n) of the Agreement.
The complete list of product codes and the relative compliance information can be consulted under the "Declaration of Conformity" link
at https://www.bianchi.com/manuals/.
GENERAL SAFETY WARNINGS
Please pay close attention to the following symbols.
DANGER!
indicates a potential danger which may cause serious injury or death if not avoided.
WARNING!
indicates practices and conduct to be adopted for safe product use.
INFORMATION!
Indicates additional information on how to use the product.
WARNING!
Please note that failure to comply with the warnings and provisions contained in this data sheet exempts the manufacturer of
any liability.
INTENDED USE
ASTM CATEGORY 1
Designed for use on paved surfaces such as asphalt roads and cycleways.
The tyres remain in constant contact with the ground.
FRAME AND FORK
The frame and fork of the RC, PRO and COMP models are 100% carbon fibre and designed to the specifications of Bianchi engineers to
optimise the sports performance and aesthetics, rigidity and lightness of the Specialissima frame.
Internal cable housing and casing.
Standard Press-Fit 86.5 x 41mm bottom bracket.
The head tube is designed to house two 1"1/2 bearings.
The frame and fork are equipped with M12 thru-axles to attach the wheels.
The frame is compatible with electronic shifting systems only.
Maximum tyre width 32mm. *
The frame is compatible with bottle cages mounted to the seat post and the down tube.
The frame is compatible with brazed-on derailleurs only.
The RC frame weighs 780g ± 5% (medium, 55).
The PRO frame weighs 830g ± 5% (medium, 55). * equipped with Bianchi CV system technology
The COMP frame weighs 900g ± 5% (medium, 55).
The Specialissima RC, PRO and COMP frames conform to UCI regulations.
* WARNING!
The measurement refers to the actual size and not to the image on the cover.
4