Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
PROBLEM
No power/no mist from spout
Peculiar odor
Excessive noise
POSSIBLE CAUSE
• Unit is not plugged in
• No power at unit
• Low water level
• Transducer/ultrasonic
membrane needs cleaning
• The mist chimney is not
locked into the humidifier
tank, or the pointer is not
pointing to the lock icon
• Unit is new
• If unit is in use, the odor
may be a dirty tank or old
tank water
• Old water in water reservoir
• Unit is not level
• Low water level
12
SOLUTION
• Plug unit in
• Press the power button to
turn the unit on
• Check circuits and fuses or
try a different outlet
• Refill the tank with water
• Follow Cleaning the
Transducer/Ultrasonic
Membrane instructions
in the Cleaning and Care
section
• Remove the mist chimney
first and then pour out any
water remaining in the water
reservoir, replace the mist
chimney and make sure it
is locked before filling with
water
• Remove the tank cap and let
the tank air out in a cool, dry
place for 12 hours
• Empty the old water,
clean the tank, and fill
with clean water
• Empty the water tank;
remove the mist chimney
and pour out any remaining
water in the water reservoir
• Place unit on a flat,
even surface
• Check the water level; refill
the tank if the water is low
