Idiomas disponibles
Idiomas disponibles
If you live in an area with hard water, or use a water softener, we recommend using distilled water for
better results from your humidifier. Never use water-softening additives in your humidifier.
INSTALLATION INSTRUCTIONS
1. Remove demineralization cartridge from packaging and soak
in water for 10 minutes.
2. Remove the tank cap.
3. Fill the tank with water as shown in the How to Fill section of
this instruction book.
4. Add the soaked demineralization cartridge to the tank.
5. Replace the tank cap on the humidifier.
CLEANING AND CARE
CAUTION: Before cleaning the unit, turn power off and unplug unit from the outlet.
CLEANING THE TRANSDUCER/ULTRASONIC MEMBRANE
The transducer/ultrasonic membrane must be cleaned to remove water mineral deposits when the red
LED is illuminated above the clean transducer/ultrasonic membrane button. Failure to do so may cause
reduced or no mist output.
1. Remove the tank cap
and tank cover and
set aside.
To purchase new Demineralization Cartridges, Model # UHE-HDC4, go to the retailer or visit www.homedics.com (US), www.homedics.ca (CAN).
2. Remove the mist
chimney by pushing
down and turning it
to the left until the
pointer is pointing to
the unlock icon and
pulling up.
3. Pour out any water
remaining in the
tank.
10
Demineralization Cartridge
4. Clean the transducer/ultrasonic membrane
with a 50/50 mix of white vinegar and
water on a cotton swab. Wipe off with a damp
cotton swab. NEVER touch the transducer/
ultrasonic membrane with your fingers; the
natural oils in the skin can damage the
surface. NEVER submerge the base in water
or any other liquid.
